Removal of Cu2+ from Water Using Liquid-Liquid Microchannel Extraction

The very good extraction selectivity of Cu²⁺ from water was demonstrated with a new microchannel equipment, by employing di-(2-ethylhexyl)phosphoric acid (D2EHPA) as an extractant and kerosene as a solvent. The effects of different experimental parameters on the extraction efficiency E, the volumetric mass transfer coefficient K_La, and the entrainment were experimentally investigated. The results showed that the extraction efficiency increased with increasing temperature, extractant concentration, phase ratio (organic/aqueous), and pH. The total flow rate, phase ratio, and pH were found to have a great effect on the mass transfer, whereas the temperature and the extractant concentration showed little effect.     

近似完全匹配层边界条件吸收效果分析及衰减函数的改进

完全匹配层边界条件存在两个问题，一是如何减少实际应用带来的额外存储量以及提升计算速度，另一个是如何提升匹配层的吸收效果。对于第一个问题发展了多种非分裂形式，本文采用一种直接对波场进行变换的新型非分裂方法，相比卷积完全匹配层具有不改变方程的形式以及易于实现等优势。对于如何进一步提升完全匹配层吸收效果，没有太大的进展。这是因为离散差异使匹配层的吸收问题更为复杂，一般采取增加匹配层层数的措施缩小离散差，但是又会导致计算量和存储量的增加。本文以在不增加匹配层层数以及不减小理论误差的情况下减小离散差异所带来的虚假反射为目的，分析传统的衰减因子，研究匹配层的吸收机理，设计新的衰减因子，以提高完全匹配层的吸收性能。新衰减因子能够进一步削弱虚假反射振幅，在匹配层层数为5~20层时，对应的边界反射振幅只有改进前的40%~80%。     

Synthesis and characterization of porous platelet-shaped α-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> with enhanced photocatalytic activity for 17α-ethynylestradiol

The porous platelet-shaped α-Bi₂O₃ photocatalyst was successfully synthesized by a novel hydrothermal–calcination method assisted with ethylenediamine and polyvinylpyrrolidone. The physical and chemical properties of α-Bi₂O₃ photocatalyst were characterized based on XRD, XPS, SEM, TEM, EDS, UV–Vis DRS, and PL techniques. The influence of preparation conditions on the formation of α-Bi₂O₃ photocatalyst was investigated, and the effect of catalyst dosage and pH value on the EE2 removal rate was also investigated. The synthesized porous platelet-shaped α-Bi₂O₃ photocatalyst exhibited excellent photocatalytic activity for 17α-ethynylestradiol (EE2), and 97.8% of EE2 was removed after 75 min of visible light irradiation using α-Bi₂O₃ as photocatalyst. The reaction rate constant over the porous platelet-shaped α-Bi₂O₃ photocatalyst was 11.6 and 11.4 times of that of traditional α-Bi₂O₃ and N-TiO₂, respectively. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The porous platelet-shaped α-Bi₂O₃ was a stable and efficient photocatalyst, proving that it is a promising photocatalyst.     

Numerical Simulation on Design of Temperature Control for Side Heater in Directional Solidification System of Multi-Crystalline Silicon

In this paper, the transient numerical simulation was used to study the effects of temperature variation in three ways (the open downward parabola, the str     

青海省都兰县开荒地区地球化学特征及找矿预测

青海省都兰县开荒地区大地构造位置处于塔柴板块南缘，东昆仑造山带中段，雪峰山—布尔汗布达金、钴、铜成矿带内。为在开荒地区实现找矿突破，于研究区内开展了1∶50 000水系沉积物测量工作，以527件水系沉积物样品数据为基础，采用元素的变异系数、富集系数、浓集比率对Au、Ag、As、Sb、Cu、Pb、Zn、W、Mo 9种元素进行了数理统计分析，分析各元素在空间上的富集规律及其成矿潜力，并结合成矿地质条件对研究区进行了成矿预测。研究表明：Au在研究区内具有较大的成矿潜力，其他元素的成矿潜力较小；通过R型聚类分析及因子分析确立了研究区内与Au成矿有关的元素组合为Au-As-Sb-Pb；运用衬度异常方法在研究区内圈定了2处找矿靶区，KH1靶区与KH2靶区内的Au、As、Sb、Pb异常套合性较好，并且在KH1靶区内发现了白金沟金矿体。由于KH2靶区与KH1靶区内的各元素套合性及成矿地质条件极为相似，故认为KH2靶区也具有较好的找矿潜力。分析结果对于在研究区进一步开展找矿勘探工作及相关成矿预测研究有一定的参考价值。     

Operating Range Scheduled Robust Dahlin Algorithm to Typical Industrial Process with Input Constraint

International Journal of Control, Automation and Systems - There is a class of typical nonlinear industrial process, which can be characterized by a first-order inertia plus pure delay model in an...     

高炉瓦斯灰泥铅锌铁综合利用磁化焙烧条件研究

为了确定新钢高炉瓦斯灰泥中铅锌铁回收的焙烧工艺条件，进行了磁化焙烧温度、焙烧时间、无烟煤用量和料层厚度条件试验，并在条件试验确定的参数基础上进行了组合微调优化。结果表明，在焙烧温度为1 120 ℃、焙烧时间为3.5 h、无烟煤用量为25%、料层厚度为35 mm情况下，铅、锌回收率分别超过86%和93%，磁选铁精矿铁品位超过63%、铅锌总含量不超过0.4%、铁回收率超过81%，达到了国家“863”任务书规定的各项技术指标要求。     

大柳塔煤矿五盘区5-2煤层DDF2断层特征

大柳塔煤矿五盘区5-2煤层在三维地震资料解释中发现存在一条影响较大、伸展较远的断层（DDF2断层）横切5-2煤层。综合研究表明，DDF2断层为走向为东南—西北方向（111°～291°）、倾向为西南方向（201°）的高角度正断层。该断层为坳陷盆地形成后控制部分煤层沉积:在D306钻孔和D307钻孔所在区域形成时间较早，形成于5-2煤层沉积之后，结束于4-3煤层形成之后，控制5-2煤与4-3煤之间的地层沉积，为同沉积断层；该断层在D304钻孔和D305钻孔所在区域形成时间较晚，形成于4-2煤层沉积之后，结束于3-1煤层形成之后，局部控制4-2煤层与3-1煤层之间沉积，为准同生沉积断层。DDF2断层形成于东南方向，逐渐向西北方向迁移、加剧到最后尖灭。     

Genes Identification,Molecular Docking and Dynamics Simulation Analysis of Laccases from Amylostereum areolatum Provides Molecular Basis of Laccase Bound to Lignin

An obligate mutualistic relationship exists between the fungus Amylostereum areolatum and woodwasp Sirex noctilio. The fungus digests lignin in the host pine, providing essential nutrients for the growing woodwasp larvae. However, the functional properties of this symbiosis are poorly described. In this study, we identified, cloned, and characterized 14 laccase genes from A. areolatum. These genes encoded proteins of 508 to 529 amino acids and contained three typical copper-oxidase domains, necessary to confer laccase activity. Besides, we performed molecular docking and dynamics simulation of the laccase proteins in complex with lignin compounds (monomers, dimers, trimers, and tetramers). AaLac2, AaLac3, AaLac6, AaLac8, and AaLac10 were found that had low binding energies with all lignin model compounds tested and three of them could maintain stability when binding to these compounds. Among these complexes, amino acid residues ALA, GLN, LEU, PHE, PRO, and SER were commonly present. Our study reveals the molecular basis of A. areolatum laccases interacting with lignin, which is essential for understanding how the fungus provides nutrients to S. noctilio. These findings might also provide guidance for the control of S. noctilio by informing the design of enzyme mutants that could reduce the efficiency of lignin degradation.